• 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Impressa S9 problem
#6
Kaffeestudio-Lamb schrieb:Is there a filter in the water tank? Then try to remove it.
I think there must be a blockage between the pump and the coffee spout.
Steam and Coffee are different ways. So the Steam-Side is okay, the coffee side not.
It´s not normal, that the pump is quiet.
I start from a calcification. A chunk of the purely dissolves and then reattached.

Thank you for your answer!

There is no Claris filter installed, we have very soft water here. Decalcifying has been run (see my previous post) but with the same results.

It feels like when I'm rinsing/making coffee most of the water comes in the tray (but not in the coffee waste bin) instead of the spout.

I have a new premium o-ring kit which I bought from you but the other kit I installed about 1,5 years ago and I can hear that the brewing unit sounds mechanically as it should, it sounds like when the machine was new.

If I don't find anything I'll try to post a video on YouTube or something if that helps?
  Zitieren


Nachrichten in diesem Thema
Impressa S9 problem - von BL! - 30.08.2014, 18:34
RE: Impressa S9 problem - von BND-Kaffeestudio - 01.09.2014, 09:05
RE: Impressa S9 problem - von BL! - 01.09.2014, 09:29
RE: Impressa S9 problem - von BL! - 01.09.2014, 22:14
RE: Impressa S9 problem - von BND-Kaffeestudio - 02.09.2014, 11:47
RE: Impressa S9 problem - von BL! - 02.09.2014, 12:21
RE: Impressa S9 problem - von BL! - 04.09.2014, 10:46
RE: Impressa S9 problem - von BL! - 05.09.2014, 10:31
RE: Impressa S9 problem - von BND-Kaffeestudio - 05.09.2014, 16:15

Möglicherweise verwandte Themen…
Thema Verfasser Antworten Ansichten Letzter Beitrag
  Impressa J5 problem BL! 0 34 17.12.2025, 17:10
Letzter Beitrag: BL!
  Impressa F7 - Problem beim Einbau neuer Brühgruppe Impressabesitzerin 15 4.949 25.12.2024, 09:52
Letzter Beitrag: Schlawi
  Problem mit Jura F90 Impressa Jura F90 Impressa 5 6.807 23.02.2022, 21:10
Letzter Beitrag: Nordbruch
  Jura Impressa F7, Problem beim Zusammenbau Stoni 8 15.358 18.10.2019, 17:28
Letzter Beitrag: Stoni
  Impressa x90 Problem Keramikventil Hermeskeiler 7 21.046 24.02.2016, 13:28
Letzter Beitrag: Jurist
  Problem Jura Impressa E55 wird viel zu heiß 1 9.799 17.10.2010, 09:10
Letzter Beitrag: kaffeestudio
  Problem mit Jura Impressa E25 harry2212 2 7.739 10.09.2009, 09:47
Letzter Beitrag: harry2212
  Jura Impressa M 30 Problem mit Wahltaste Dampf 1 5.769 29.08.2009, 19:36
Letzter Beitrag: Gast
  Jura Impressa X90/X95 Dampf Problem Gasti 4 11.592 12.08.2009, 21:09
Letzter Beitrag: Gast
Sad Jura Impressa S 95 Cappuccinatore problem robby 1 5.758 04.04.2009, 10:14
Letzter Beitrag: Gast

Gehe zu: