![]() |
|
Krups XP 9000 Service 1 - Druckversion +- www.juraprofi.de & www.kaffeestudio.de - Alles für Ihren Kaffeevollautomaten (https://www.kaffeestudio.de/forum) +-- Forum: Fragen und Antworten rund um Ihren Kaffeevollautomaten (https://www.kaffeestudio.de/forum/forumdisplay.php?fid=1) +--- Forum: Technische Probleme Bosch & Siemens (https://www.kaffeestudio.de/forum/forumdisplay.php?fid=6) +--- Thema: Krups XP 9000 Service 1 (/showthread.php?tid=2395) |
Krups XP 9000 Service 1 - Smaily01 - 20.03.2013 Hallo zusammen, da ich gelesen habe dass die XP 9000 in etwa mit den Siemens Geräten baugleich ist, habe ich in diesem Unterforum gepostet. Mein Problem ist die Fehlermeldung "Service 1 Hotline anrufen" nachdem Uhrzeit eingestellt und Wasserbefüllung durchgeführt ist...Bin etwas ratlos wie ich weiterkomme. Vieleicht hat schon jemand diesen Fehler gehabt oder gar beseitigt. Danke schon mal Smaily01 __________________________________ English: Hi, I have read that the XP 9000 is identical in about the Siemens appliances, I've posted in this sub-forum. My problem is the error message "Call Service Hotline 1" after the time set and performed water filling is ... I'm a little perplexed as I am stuck. Maybe someone has already had this error or even eliminated. Thanks in advance Smaily01 RE: Krups XP 9000 Service 1 - oryx24 - 25.12.2013 Ja, ich hatte den gleichen Fehler. Es ist ein Hinweis auf den Temperaturfühler (NTC-Widerstand) auf dem Erhitzer. Gibts als Ersatzteil bei juraprofi.de. Es muss allerdings nicht unbedingt die Fehlerursache sein. Der Widerstand hat einen Sollwert von 13 KOhm bei 20 Grad Celsius Viel Erfolg _________________________________ English: Yes, I had the same error. It is an indication of the temperature sensor (NTC resistor) to the heater. There as a spare part from juraprofi.de. However, it is not necessarily the cause of the error. The resistor has a nominal value of 13 ohms at 20 ° C. Good luck |